STILLA S3011, Assembly Instructions Manual, Page: 7 / 48

6 | P a g e
STEP 2.0
WALL ASSEMBLY
2.0 - ASSEMBLY PARTS – WALL ASSEMBLY
PART CODE QTY DESCRIPTION
FP 1 480mm Wall panel (If double doors chosen – 180mm Panel)
P 1 900mm Wall panel
65HHS 3 65mm Hex head screw
– If optional window was purchased, it can take the place of any (P) panel.
2.0 - ASSEMBLY – WALL ASSEMBLY
Screw through FP into P (top, centre & bottom) using 3 x 65HHS. (Holding studs flush on the
outside )
Note: Ensure tongue on VJ cladding is facing upwards.
P
Screw 3 x 65HHS (Top,
centre & bottom)
FP
Cedar Strip
When screwing the four corners together please make sure the studs are flush on the
outside (not the inside) as per image below.