33 |
P a g e
STEP 4.8
PAD BOLT INSALLATION
4.8 - ASSEMBLY PARTS
–
PAD BOLT INSTALLATION
PART CODE
QTY
DESCRIPTION
PB
2
Pad bolt
HS
8
Hinge Screw
4.8 - ASSEMBLY
–
PAD BOLT INSTALLATION
Hold PB in position and fasten to door. Mark centre of bolt and drill 12mm hole in marked
closed position. Repeat for bottom pad bolt.
-
The T handle must be installed on the opposite door to the pad bolted door (fixed
door)
STEP 4.9
DOOR HANDLE ASSEMBLY
4.9 - ASSEMBLY PARTS
–
DOOR HANDLE ASSEMBLY
PART CODE QTY
DESCRIPTION
TH
1
T Handle
4.9 - ASSEMBLY
–
DOOR HANDLE ASSEMBLY
Mark and drill 12mm centre hole in position shown, 50mm in from door edge. T Handle
must be installed centre of the centre door brace (on the back)
Insert T handle in position and mark two outside holes. Remove T handle and drill 2 x 6mm
holes.
Insert T handle back in with bolts, and fasten nuts on back of door.
Summary of Contents for Chatswood
Page 45: ...44 P a g e ...
Page 46: ...45 P a g e ...
