Still SXH-20 Original Instructions Manual Download Page 88

Page: 88 / 126

Handling the truck in an emergency

Truck towing procedure

It is not possible to tow the truck with no elec-

trical function. The electromagnetic brake re-

mains in the closed position.
Truck towing is authorised with a rigid connec-

tion (tow bar) if the truck to be towed can no

longer be braked. Check that the towing vehi-

cle is sufficiently powerful to pull and brake the

truck being towed.

Moving with no battery

NOTE

In the event of an electrical fault or no battery,

it is possible to unlock the brake manually.

CAUTION

This procedure must be carried out by authorised

personnel.

–

Unload the fork arms, then disconnect the

battery.

–

Remove the engine cover.

–

Two M5 X 35 screws (1) are required.

–

Screw the screws (1) to the brake (2) in the

holes (3). The brake is then unlocked.

CAUTION

The truck must only be towed at low speeds.

0252_003-109



Use

Handling the truck in an emergency

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands