Still RX70-40, Original Instructions Manual

Page: 280 / 392

4
Operation
Display messages
7325_003-054_en_V2
F1
F2
The shift time has been exceeded
NOTE
The shift time is adjustable.
If the key switch is switched on and the driver
does not leave the seat before the set shift
time is exceeded,
SEAT SWITCH
appears
on the display. This is also the case if an
operating device for the working hydraulics or
the accelerator pedal is actuated. Depending
on the configuration, the working hydraulic
functions can be executed normally, only
slowly or not at all.
– Stand up briefly from the seat, sit back down
again and fasten the seat belt.
The truck can again be operated without
restrictions.
7325_003-055_en_V3
F1
F2
The operating time has been exceeded
NOTE
The operating time is adjustable.
If the key switch is switched on, the parking
brake is released and the driver does not
leave the seat before the set operating time is
exceeded, and if neither the operating devices
for the working hydraulics nor the accelerator
pedal are actuated during this time,
SEAT
SWITCH
appears on the display. The truck will
not move. Depending on the configuration, the
working hydraulic functions can be executed
normally, only slowly or not at all.
– Stand up briefly from the seat, sit back down
again and fasten the seat belt.
The truck can again be operated without
restrictions.
OVERHEATING message
If the message
OVERHEATING
appears
on the display, the traction motors have
overheated. The acceleration and the speed
of the truck are reduced.
– Allow the truck to cool down.
– If the error persists, contact your authorised
service centre.
268 57348011850 EN - 02/2019 - 11