Still RX60-35/600, Original Instructions Manual

Page: 88 / 470

4
Operation
Checks and tasks before daily use
Checks and tasks before daily use
Visual inspections and function
checking
WARNING
Risk of injury from falling off the truck!
When climbing onto the truck, there
is a risk of getting stuck or slipping
and falling. Use suitable equipment to
reach higher points on the truck.
– Use only the steps provided for this
purpose to climb onto the truck.
– Use equipment such as steplad-
ders or platforms to reach inacces-
sible areas.
1
2
6210_000-002
Fork arms and roller tracks
Damage to the truck or the attachment (va-
riant), non-functional switches or safety sy-
stems and modification of predefined set va-
lues can lead to unpredictable and dangerous
situations. To ensure that the truck is opera-
ted safely, the visual inspections and function
checking must be carried out before daily use.
The components that must be checked and
their check points are listed in the following
table. If damage or other defects are identified
on the truck or the attachment (variant) during
the following inspections, the truck must not be
used until it has been properly repaired. Da-
mage or other defects must be reported to the
supervisor or the responsible fleet manager
immediately so that repairs by the authorised
service centre can be arranged.
Ensure that the truck is safe for operation each day before it is used:
Component
Course of action
Fork arms, general lifting accessories
Perform a visual inspection to check for deformation
and wear (e.g. to check if they are bent, broken or
feature significant wear).
Check the condition and function of the safety
devices (1) to prevent lifting and shifting.
Roller tracks (2) Make sure that there is a film of grease.
Load chains
Perform a visual inspection to ensure that the chains
are intact and have adequate and even tension.
74 171533 EN - 02/2019 - 19