Still RX60 35-50, Original Instructions Manual

Page: 255 / 596

Determining visibility conditions when driving with a load
A
D
Y
Z
C
D
6301_003-167
Area that is not visible (max. 1085 mm)
Load height (in driving position)
4000 mm (distance to the front from the rear
corner of the load when it is positioned on
the fork carriage in the driving position)
A
C
D
Load
Driver's eye level
Y
Z
The driver's field of vision can be severely
limited when driving with a larger load (Y) or
with attachments fitted. In this case, safe oper-
ation is no longer guaranteed.
Visibility conditions can be evaluated by de-
termining the size of the area that is not visi-
ble (A).
If the area that is not visible exceeds 1085 mm
(EN16842-2/A3), the visibility conditions are
inadequate.
Procedure:
–
Sit down on the driver's seat and adopt the
seat position.
–
Determine the area that is not visible (A)
using the load height (C) and the length of
the route (D) = 4000 mm.
This area that is not visible (A) must not ex-
ceed 1085 mm.
–
If the area that is not visible (A) exceeds
1085 mm, take one of the following meas-
ures:
●
Drive backwards.
●
Divide the loads so that the load height (C)
is reduced and the area that is not visi-
ble (A) becomes smaller than 1085 mm.
Operating
4
Handling loads
239 56388011501 EN - 05/2022 - 08