Still R 07-25, Original Instructions Manual

Page: 64 / 246

5
Operation
Checks and tasks to be carried out prior to commissioning
Checking the condition of the wheels
and tyres
WARNING
Risk of accident! Uneven wear reduces the stability
of the truck and increases the braking distance.
– Worn or damaged tyres (left or right) must be
replaced immediately.
NOTE
Only approved tyre types may be used; see
chapter entitled "Technical data".
– Check the tyres for wear and damage.
Tyres must not be damaged or excessively
worn. They must be worn evenly on both
sides.
Adjusting the MSG 65/MSG 75
driver's seat
DANGER
There is a risk of accident if the seat or seat backrest
shifts suddenly, which could cause the driver to
move in an uncontrolled manner. This may result in
unintentional actuation of the steering or operating
devices and thus cause the truck or load to move in
an uncontrolled fashion.
– Do not adjust the seat or seat backrest while
driving.
– Adjust the seat and the seat backrest so that all
operating devices can be actuated safely.
– Ensure that the seat and seat backrest are
securely engaged.
WARNING
To obtain optimum seat cushioning, you must ad-
just the seat suspension to your own body weight.
This is better for your back and protects your health.
– To prevent injury, make sure that there are no
objects within the swivel area of the seat.
NOTE
If there are separate operating instructions for
the seat, they must be observed.
54 172780 EN - 06/2017