Still MX-X Original Instructions Manual Download Page 115

Page: 115 / 132

Special equipment

Battery on a roller channel

Knurled-head screw

Battery lock

Rubber buffer

Battery on a roller channel

Description

The battery rests on roller channels and can

be installed and removed from the side of

the truck using a battery change frame*. The

battery is secured with clamping devices on

both sides and held in position in this way.
Monitoring
The battery locks are electrically monitored. If

one of the locks is not correctly locked in place

an error message appears in the display and

the truck will stop.

WARNING

Every time before starting work the battery locks (2)

must be checked for perfect condition and function.

* Option

5231 804 2502 EN - 11/2017

109

Summary of Contents for MX-X





































































































































Search results

Summary of Contents for MX-X

Reviews:

Related manuals for MX-X

Brands by name

Popular brands

Still MX-X, Original Instructions Manual

Search results

Summary of Contents for MX-X

Reviews:

Related manuals for MX-X

Brands by name

Popular brands