Still LXT 120, Original Instructions Manual

Page: 158 / 324

The
Speed restriction
menu opens.
–
Using the softkeys, set a maximum speed
between 2 km/h and 20 km/h.
The maximum speed is dependent on the in-
dustrial truck equipment and may be restricted
by a factory setting.
–
To
save
, press the button.
The maximum speed is entered.
–
To
clear
, press the scroll button.
The entry is deleted.
–
To
cancel
, press the back button .
The display reverts to the previous menu.
The main display button takes you to the
main display.
Display for uphill and downhill
gradients
The main display of the display-operating unit
shows the current uphill gradient or current
downhill gradient of the route travelled. A
downhill gradient is displayed with a negative
sign (A) and an uphill gradient is displayed
without a sign (B). To the right of this display,
the maximum permissible value for an uphill
gradient or a downhill gradient for the indus-
trial truck is also displayed. This allows the
driver to assess at any time whether they are
still within the permissible tolerances with the
industrial truck.
Parking the industrial truck se-
curely and switching it off
DANGER
Risk of fatal injury from being run over if
the industrial truck rolls away.
–
Do not park the industrial truck on a
slope.
–
In emergencies, secure the truck us-
ing wedges on the side facing down-
hill.
–
Do not leave the industrial truck until
the parking brake has been applied.
Enter maximum
speed (2...20km / h)
km / h 10
Speed restriction
6219_003-193_en


Operation
4
Driving
146 50078078001 EN - 07/2022 - 04