Still LTX-T04, Original Instructions Manual

Page: 48 / 114

5
Use
Commissioning
Commissioning
Commissioning advice
We recommend that you avoid excessive use
of the vehicle for the first 50 operating hours.
During the first few days or the first few
operating hours, and after each wheel change,
check the tightness of the wheel nuts to ensure
that they are correctly seated before using the
vehicle.
NOTE
Refer to the Maintenance section for wheel
nut cross-tightening and torque.
Daily checks before driving
IMPORTANT:
Every time before starting work, it is essential
to carry out checks on the operation of the
vehicle, particularly the safety devices.
Check the correct operation of the following
devices:
• Forward/reverse travel function
• Electromagnetic brake function
• Automatic regenerative brake function
• Emergency stop switch function
• Horn function
• Operator presence switch
• Battery lock (only for models equipped with
battery lock)
DANGER
Risk of death, injury and/or serious damage to the
equipment.
If the vehicle malfunctions, immediately notify the
relevant personnel and stop using the vehicle.
Before driving
People in the hazard area
Before starting the truck and while you are
working, ensure that no one is in the hazard
area. If anyone is in the hazard area, warn
them well in advance. Stop working with the
truck immediately if the people do not leave
the hazard area despite the warnings.
Danger area
The hazard area is the area in which people
are in danger from the tow truck movements,
from its work equipment and from its trailers or
from the load. The areas in which a load could
fall or work equipment could lower or fall are
also part of the hazard area.
42 1193 801 16 01 EN - 06/2016