Still FXD 20, Original Instructions Manual

Page: 77 / 162

Driving: Single-pedal option
Specific features of the single-pedal
option
The operation of a truck equipped with an ac-
celerator pedal is identical to that of a truck
without an accelerator pedal. The differences
in operation relate to the following aspects:
●
The operator presence detection devices
●
Driving
●
Reversing the direction of travel
●
Braking
These aspects are described in the sections
below.
Operation of operator presence de-
tection with the single-pedal option
DANGER
Risk of serious injury
Always keep your body inside the driver's compart-
ment while the truck is moving.
The truck is equipped with two operator pres-
ence detectors:
●
The chair (1)
●
The operator presence button on the floor
(2)
These two components are truck safety devi-
ces.
To activate the operator presence detection,
proceed as follows:
–
Sit on the seat (1).
–
Press the operator presence button (2).
Keep the pedal depressed before and whilst
the truck is moving.
The truck controls are available.
In reverse travel (fork direction), it is possible
to leave the seat in the event of poor visibili-
ty. The truck then travels at 2 km/h. The fork-
lift operator presence pedal must be kept de-
pressed.

Use
4
Driving: Single-pedal option
67 11648011751 EN - 02/2021 - 06