Still EXU-S 22 Original Instructions Manual Download Page 89

Page: 89 / 122

Application

Handling the truck in speciﬁc situations

Towing without a battery

NOTE

In case of an electric failure or if no battery is

installed, the brake can be released manually.

CAUTION

This service must be carried out by your after-sales

service.

Hoisting the truck

CAUTION

Only use a lifting gear and crane with a sufﬁcient

load capacity. See the vehicle identiﬁcation plate

for the loading weight.

0148_003-026

– For hoisting with a crane, always attach the

slings to the points identiﬁed with the hook

symbol.

CAUTION

It is strictly forbidden to attach the lifting slings to

the cockpit or to other points not intended for this

purpose.

CAUTION

– Insert pieces of wood to prevent damage.

DANGER

Danger to life!
Do not step or stand under a suspended load.

Towing procedure

Towing the truck is only possible if there is still

a power supply, otherwise the electric brake is

still applied.

NOTE

The brake can be released. Please contact

your after-sales service.

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands