Still EXU-S 22 Original Instructions Manual Download

Page: 67 / 122

Application

Driving

Soft braking

NOTE

The truck is braked electrically.

123

456

PRG

0148_003-018

– Release throttle (3) or (4) when driving.

0148_003-01

– Leave the presence area (5).

Average braking

– Operate the throttle (3) or (4) in the opposite

direction.

Emergency braking

CAUTION

This type of braking may only be used in an emer-

gency.

– Press the emergency brake button (2). The

pallet truck stops.

–

SToP

appears in the display.

NOTE

Press the button

"ON" (1) to resume work.

After

StoP

disappears from the display, the

truck is operational again.

The truck is operational again.

Parking brake

– Release traction control (3) or (4).

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands