Still EXH-SF 20 Original Instructions Manual Download Page 103

Page: 103 / 138

Servicing and maintenance personnel training and qualification

Truck maintenance must only be carried out

by qualified and authorised personnel.
The annual inspection for prevention of acci-

dents at work must be carried out by a person

qualified to do so. The person carrying out this

inspection must provide their expertise and

opinion without being influenced by economic

factors or company internal issues. Safety is

the only critical deciding factor.

The person responsible for carrying out the in-

spection must have sufficient knowledge and

experience to be able to assess the condition

of the truck and the efficiency of the protective

installations in accordance with the technical

regulations and principles established for

checking industrial trucks.

Battery maintenance staff

Batteries must only be recharged, maintained

and changed by specially trained personnel.

Personnel must follow the manufacturer's in-

structions of the battery, the battery charger

and the truck.

It is essential to follow the battery mainte-

nance instructions and the battery charger op-

erating instructions.

Maintenance operations that do not require special training

Simple maintenance operations such as

checking the hydraulic fluid level or checking

the battery electrolyte level can be carried out

by persons with no special training.

A specific qualification is not necessary.
Refer to the maintenance section of this man-

ual for further information.

Ordering spare parts and consumables

Spare parts are provided by our spare parts

service department. You will find the informa-

tion required to place an order in the spare

parts and fitting catalogue.
Only use spare parts recommended by the

manufacturer.

Unauthorised spare parts may increase the

risk of accidents due to faults relating to quali-

ty or incorrect choices. Anyone who uses non-

compliant spare parts must assume full re-

sponsibility in the event of an accident.

Maintenance

General maintenance information

11538011651 EN - 02/2021

Summary of Contents for EXH-SF 20











































































































































Search results

Summary of Contents for EXH-SF 20

Reviews:

Brands by name

Popular brands

Still EXH-SF 20, Original Instructions Manual

Search results

Summary of Contents for EXH-SF 20

Reviews:

Brands by name

Popular brands