Still EXH 25, Original Instructions Manual, Page: 85 / 130

extraction rollers (fitted with rollers) for easier
handling of the battery.
To change the battery, proceed as follows:
–
Immobilise the truck.
–
Lower the load arms.
–
Switch off the ignition and remove the key.
–
Press in the emergency off switch.
–
Open the battery hood.
–
Disconnect the battery connector.
–
Place the connector on the battery cells.
–
Unlock the door that is not attached to the
side of the battery by lifting the latch (1).
Hold the door (2) to prevent it falling.
–
Remove the door (2) (if this option is selec-
ted) and put it to one side.
–
Position the truck with extraction rollers or
the roller frame in the upright position near
the battery compartment on level ground.


Use
4
Handling the battery
77 11538011551 EN - 02/2021 - 08