Still EXD-S 20, Original Instructions Manual

Page: 55 / 144

–
Gradually and slowly press the drive switch
backwards (2) with your thumb.
–
When the drive switch is released, the truck
brakes electrically.
WARNING
Restricted visibility
During reverse travel, visibility may be restricted. Be
very careful. Make sure that the path behind is clear
before travelling in reverse.
Reversing the direction of travel
–
Push the drive switch in direction (1) or (2).
–
Release the drive switch.
–
Operate it progressively in the opposite di-
rection until the required speed is reached
Steering
In a straight line, the steering wheel is centred.
To move the truck, proceed as follows:
–
Turn the steering wheel to the left: the truck
turns to the left in forward travel (1).
–
Turn the steering wheel to the right: the
truck turns to the right in forward travel (2).
WARNING
Risk of tipping
Always slow down before negotiating a corner. Ap-
proaching a tight corner too fast can cause the truck
to overturn.
Optional: Inverted steering may be selected.
You must therefore adapt your driving. If the
steering wheel is turned to the left: the truck
turns to the right in forward travel. If the steer-
ing wheel is turned to the right: the truck turns
to the left in forward travel.
The electric steering allows the forklift opera-
tor to drive accurately and effortlessly.
–
Whilst driving the truck, turn the steering
wheel.

Use
4
Driving
45 11638011751 EN - 02/2021 - 03