Hydraulic fluid
WARNING
During operation of the forklift truck, hy-
draulic fluids are pressurised and are
hazardous to your health.
–
Do not spill these fluids!
–
Follow the statutory regulations
–
Do not allow the fluids to come into
contact with hot motor parts.
–
Do not allow to come into contact with
the skin.
–
Avoid inhaling the spray
–
Penetration of pressurised fluids into
the skin is particularly dangerous if
these fluids escape at high pressure
due to leaks in the hydraulic system.
In case of such injury, seek medical
advice immediately.
–
To avoid injury, use appropriate per-
sonal protective equipment (e.g. pro-
tective gloves, industrial goggles, skin
protection and skin care products).
ENVIRONMENT NOTE
Hydraulic fluid is a water-polluting substance!
Always store hydraulic fluid in containers com-
plying with the regulations.
Avoid spilling.
Spilt hydraulic fluid should be removed with
oil-binding agents at once and disposed of ac-
cording to the regulations.
Dispose of old hydraulic fluid according to reg-
ulations.
Disposal of consumables
ENVIRONMENT NOTE
Materials that have to be disposed of following
maintenance, repair and cleaning must be
systematically collected and disposed of in ac-
cordance with regulations. Observe the na-
tional regulations for your country. Work may
only be carried out in areas designated for this
purpose. Take care to minimise, as far as pos-
sible, any impact on the environment.
●
Any spillage of fluids such as hydraulic oil,
brake fluid or gear lubricant oil must be im-
mediately soaked up with an oil-binding
agent.
●
The regulations for disposal of used oil are
applicable.
●
Any spillage of battery acid must be neutral-
ised immediately.
Safety
2
Safety regulations for handling consumables
29
5001 801 1505 EN - 12/2019
Summary of Contents for ECH 12
