Still ECH 12 Original Instructions Manual Download Page 33

Page: 33 / 110

Vibrations

Vibrations to which the hands and arms

are exposed

The following value is valid for all truck mod-

els:

●

< 2.5 m/s

NOTE

It is mandatory to specify the hand-arm vibra-

tions, even where the values do not indicate

any danger, as in this case.

CAUTION

The value expressed above can be used to compare

forklift trucks of the same category. It cannot be used

to determine the operator's daily exposure to vibra-

tions during real operation of the truck; these vibra-

tions depend on the conditions of use (floor condi-

tions, method of use etc.) and therefore daily expo-

sure must be calculated using data from the place of

use.

Safety

Basic principles for safe operation

5001 801 1505 EN - 12/2019

Summary of Contents for ECH 12















































































































Search results

Summary of Contents for ECH 12

Reviews:

Related manuals for ECH 12

Brands by name

Popular brands

Still ECH 12, Original Instructions Manual

Search results

Summary of Contents for ECH 12

Reviews:

Related manuals for ECH 12

Brands by name

Popular brands