Still CX-T-40 Original Instructions Manual Download Page 74

Page: 74 / 146

Operation

Driving

– The travel speed of the truck depends on

how far the throttle is pushed.

– When the throttle is released, the truck will

be braked electrically.

Changing the direction of travel

– Release the chosen direction of travel.
– Push the throttle in the opposite direction of

travel until the desired speed is obtained.

1050_003-007

Driving, pedestrian mode with

traction button

NOTE

The truck is provided with traction buttons (1)

and (2) on both sides of the backrest. These

permit driving in the pedestrian mode on each

side. The travel speed is reduced; the cockpit

(3) can be used any time for steering.

NOTE

The truck must be turned on. If a traction

button (4) or (5) is kept depressed over a

longer period, a safety switch will brake the

truck to a stop. In this case it is sufﬁcient to

release the traction button and to press it

again.

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands