Still CX-T-40 Original Instructions Manual Download Page 71

Page: 71 / 146

Operation

Driving

pedestrian mode with cockpit, slow speed

with throttle", P. 5-65

• Driving, pedestrian mode, traction button

(option), see ⇒ Chapter "Driving, pedestrian

mode with traction button", P. 5-67

123

456

789

PRG

1044_501-001

1050_003-002

Driving, stand-on mode

– Step on the platform with both feet and step

on the presence area (1).

NOTE

The truck is turned on.

WARNING

No objects whose weight could activate the dead

man’s switch under the mat are allowed on the ﬂoor

of the driver’s platform.

WARNING

Wait until the truck has come to a complete stand-

still. Only then dismount on the side not used as

roadway.

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands