Still CX-T-40 Original Instructions Manual Download

Page: 45 / 146

Safety

Battery connection cables

Damage, defects and misuse of

safety devices

The driver must report any damage or other

defects to the truck or attachment immediately

to the supervisory personnel.
Trucks and attachments that are not functional

or safe may not be used until they have been

properly repaired.
Do not remove or deactivate safety devices

and switches.
Fixed set values may only be changed with the

approval of the manufacturer.
Work on the electrical system (e.g. connecting

a radio, additional headlights etc.) is only

permitted with the manufacturer’s written

approval. All electrical system interventions

must be documented.

Battery connection cables

CAUTION

Using sockets with NON-ORIGINAL battery con-

nection cables can be dangerous (see purchase

references in the parts catalogue)

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands