PLEASE READ ALL OF THESE SAFETY INSTRUCTIONS CAREFULLY
BEFORE USING YOUR STILL.
•
The Still should always be run on a flat dry surface in a well ventilated area.
•
Always unplug the power cord when filling or cleaning. Only use the wall
socket switch for turning power on/off.
•
Never immerse the still in water, or allow the body base or the top cover to
become wet inside.
•
This unit is not intended for use by children. Do not operate this unit where it
is possible for children to reach it.
•
Do not remove the top cover when the still is operating.
•
Allow at least 20 minutes for cooling, after switching the power off, before
you remove the lid. It is important that the still cool down before reusing.
•
Be aware that when operating the still contains boiling liquid. Occasionally
the lid may lift without warning and spill boiling liquid. Keep hands and face
clear from the immediate vicinity of the still when operating.
•
The still is fitted with a high temperature cut-out. This is used as an automatic
cut-out for water distilling and must be reset before the still can be used
again. Use the reset button on the base of the still. It is not applicable for
alcohol distilling as you are only distilling off about 20% of the starting
volume. However it will provide a safety back-up if you forget to turn the still
off and it is allowed to boil dry. If this happens you will need to press the reset
button on the base of the still before it can be operated again.
Model# MH943T/S Z988
AS/NZ Approval NSW22926
