Stilevs ROBOTEK PRO, Instruction Manual

Page: 11 / 20

11
cutting blades or discs on the base
without first putting bowl properly in
place.
• Be certain cover is securely locked in
place before operating appliance
• Never feed food by hand. Always use
food pusher.
• Do not attempt to defeat the cover
interlock mechanism.
• Always operate blender with cover in
place.
• When blending hot liquids, remove
center piece of two-piece cover.
• Do not use the appliance if juicer filter
is damaged or broken.
II. INTRODUCE THE APPLIANCE
A. MAIN BODY
A1. Drive Shaft
A2. On/Off and speed control switch
A3. P- Pulse
A4. Security Lid
A5. Blade compartment cover
A6. Motor base
B. BOWL GROUP
B1. Bowl
B2. Bowl lid
B3. Bowl lid pusher
C. DISCS SET
C1. Slicing & Grating Blades
C2. Disc holder
D. SPATULA
E. BLADE SET
E1. Chopping blade - metal
E2. Choppling blade protector
E3. Kneading blade - plastic
E4. Whisking Attachment
F. BLENDER
F1. Blender lid stopper
F2. Blender lid
F3. Blender goblet / jar / jug
G. CITRUS JUICER
G1. Juicer cone
G2. Pulp sieve / Filter
III. TECHNICAL FEATURES
Model : Robotek Pro
Voltage : 220-240V ~ 50/60 Hz.
Power : 1000W
Bowl Capacity : 1500 ml.
Citrus Juicer : 1000 ml.
Blender Capacity
: 2000 ml.
IV. OPERATING THE APPLIANCE
Mixing and Kneading
• You can mix or knead soup, dough or
pastry by using Chopping Blade or
Kneading Blade.
• Place the bowl over the drive shaft,
locate on motor base and rotate the
bowl anticlockwise until it locks into
position.
• Place the chopping or kneading blade
on to drive shaft in the center of the
bowl. Put the ingredients in the bowl.
• Place the bowl lid on top of the bowl.
Rotate the lid anticlockwise until
the locking tabs slide in to the inner
locking slot on the base and the
handle.
• For kneading the dough or pastry
operations, don’t put water in to the
bowl at the beginning. Pour the water
through the filling tube while the
processor is running. Add the water or
other liquid in a slow, steady stream,
only as fast as dry ingredients absorb
it. If liquid sloshes or splatters, stop
adding it but do not turn off processor.
Wait until ingredient in bowl have
mixed, then add remaining liquid
slowly.
• Recommended operation speed level
is 12. for dough kneading.
Chopping
• Chopping Blade is used for chopping
process.
• Place the bowl over the drive shaft,
locate on motor base and rotate the