13
This specification can vary in
accordance with the model.
• Please press the Dust Container
release button and get the dust
continer.
• Please hold the dust container
over a bucket then press the dust
release button on the container.
V. CLEANING & MAINTENANCE
• You have to unplug your device,
before beginning any Cleaning or
Maintenance processes.
• After every use, empty the dust
container, clean and dry the it.
• Do not ever leave your vacuum
cleaner with dirt in it for hygienic
purposes and extending the life
of your vacuum cleaner.
Filter
•
Remove the dust container
from its place and take out the
motorprotector filter placed
behind the container by pulling.
• It is suggested that you can wash
the sponge layer of filter and shake
off the filter to clean the dusts.
• This kind of filters should be
changes once a year.
• It will reduce the suction power
and damage the motor if you use
the wet filter.
• It is highly recommended to
change the filters between 6
months and 12 months according
to using vacuum cleaner
frequency.
Hepa Filter
• The HEPA filter should be cleaned
twice a year, and when there is
power socket before fitting or
removing accessories!
• Choose the most appropriate
accessories for your purpose and
affix these accessories directly
on the gun section or affix the
Extension tubes first and then
accessories on their ends.
• For an effective cleaning, use the
accessories as mentioned in the
following.
» Main brush for vacuuming
carpets, rugs and hard
grounds.
» Turbo Brush is especially
used for effective cleaning of
carpets and rugs
» Crevice nozzle for cleaning
the dusts, chips and etc. at
radiators, drawers and etc.
narrow sections.
» Directly the Extension Tube
for cleaning soil, debris,
chips, feathers and etc.
» The Small brush Accessories
for cleaning racks, clothes,
electronic devices, lampshades,
furniture, curtains and etc.
• Plug in your vacuum cleaner and
start it by pressing the on/off
button or using the on/off button
on the handle.
• After completing the vacuuming
process, turn off your vacuum
cleaner by pressing the On-Off
Button. Unplug your vacuum
cleaner and furl the cord by
pressing Cord Rewinder button.
For some models, for furling
the cable, it will be sufficient to
hold and pull the cord lightly.
