7 Operating states
ASTOPAD
®
Instructions for Use
31
7.6 Operation independent of the mains
(only for devices with a battery)
The ASTOPAD control unit can also be operated independent of the mains with
the battery option, to retain heat after the heating phase of the applied part.
In this
case, the device can be operated for about 2 hours independent of the mains.
7.6.1 Display battery charge level
Control panel
Action
Operate control unit with one or two applied parts.
Device
response
Display shows the symbol battery charge level (1) 100%
Display shows the symbol battery charge level (2) 10%
7.6.2 Charge battery
Control panel
Action
Connect the control unit to the mains (control unit is in
Standby mode
).
Device
response
Battery fully charged:
Display (1) shows the symbol battery charge level 100% and
control unit connected to the mains.
Battery is not fully charged:
Display (2) shows the symbol battery charge level 10% and
control unit connected to the mains. Battery is being charged.
