10. Do not cut above shoulder height.
11. Use your cut-off machine for abrasive
only. It is not designed for prying or
shoveling away any objects.
12. Do not grind on side of the abrasive
wheel.
13. Do not twist, thrust, knock or drop the
machine. This can cause damage
to the wheel.
14. Be especially alert for reactive forces
when abrasive with the front of the
wheel.
15. Be alert to shifting of the work piece
or anything that could cause the cut
to close and pinch the wheel.
16. Release the pressure on the
cut-off machine as you reach the
end of the cut. Too much pressure
may cause the operator to lose
control of the cut-off machine when
the abrasive wheel completes the
cut. The abrasive wheel may con-
tact the operator or strike some
foreign object and shatter.
17. Use extreme caution when
re-entering a cut and do not turn
the wheel at an angle or push the
wheel into the cut as this may result
in a pinching of the wheel.
0DLQWHQDQFH5HSDLUDQG6WRULQJ
RIWKH&XW2II0DFKLQH
Never operate a cut-off machine that is
damaged, improperly adjusted or not
completely or securely assembled.
Follow the maintenance and repair
instructions in the appropriate section of
your owner’s manual.
Use only STIHL replacement parts for
maintenance and repair. Use of parts
manufactured by others may cause
serious or fatal injury.
:DUQLQJ
Always stop the engine and make sure
that the wheel is stopped before doing
any maintenance or repair work or
cleaning the cut-off machine. Do not
attempt any maintenance or repair work
not described in your owner’s manual.
Have such work performed at your
STIHL service shop only.
Clean grinding dust after finishing work.
Empty the fuel tank before storing for
longer than a few days.
Fuel may only be stored in correctly
labeled and approved containers.
Avoid direct skin contact and do not
in-hale the petrol vapours.
Keep the handles dry, clean and free of
oil and fuel.
Tighten all nuts, bolts and screws except
the carburetor adjustment screws after
each use.
0DLQWHQDQFHUHSODFHPHQWRUUHSDLU
RIWKHHPLVVLRQFRQWUROGHYLFHVDQG
V\VWHPVPD\EHSHUIRUPHGE\DQ\
QRQURDGHQJLQHUHSDLUHVWDEOLVKPHQW
RULQGRZHYHULI\RXFODLP
ZDUUDQW\IRUDFRPSRQHQWZKLFKKDV
QRWEHHQVHUYLFHGRUPDLQWDLQHGSUR
SHUO\RULIQRQDSSURYHGUHSODFHPHQW
SDUWVZHUH/PD\GHQ\
ZDUUDQW\
002BA062 KN
76