![background image](http://html1.mh-extra.com/html/stihl/rme-443/rme-443_instruction-manual_1379493046.webp)
0478 121 9921 A - EN
44
1
2.4 Upper handlebar RME 443
Maintenance interval:
Before each use
The upper handlebar is coated with a
insulating layer. Should this layer become
damaged, the upper handlebar must be
replaced.
1
2.5 Mowing blade maintenance
Maintenance interval:
Before each use
●
Tilt the mower upwards into the
cleaning position. (
●
Clean the mowing blade (1) and check
it for damage (notches or cracks) and
wear; replace if necessary.
●
Use a slide calliper (not included in
standard equipment) to measure blade
thickness at 5 points at least. In
particular, the minimum thickness must
also be ensured in the area of the blade
wings.
●
Place a ruler (2) against the front blade
edge and measure permissible
grinding.
Wear limits:
Distance A:
The cutting edges may not be ground back
by more than
1
5 mm
.
Distance B:
The minimum width of the mowing blade
must not be less than
39 mm
.
Distance C:
The blade thickness must be at least
2 mm
at any point.
The check should be performed using a
slide calliper.
If the supplied standard blade is not
installed in the lawn mower, but e.g. the
multi-blade, which is available as a special
accessory, different wear limits apply.
1
2.6 Removing and installing the
mowing blade
1
Removing:
●
Use a suitable wooden block (1) to
counterhold the mowing blade (2).
●
Tighten the blade fastening screw (3).
Remove the mowing blade (2) and
blade fastening screw (3).
2
Installing:
●
Clean the blade contact surface and
blade bushing.
●
Fit the mowing blade (2) onto the blade
bushing with the curved edges pointing
upwards. Locating lugs (4) must be
located in bores (5) of the mowing
blade.
1
7
Risk of injury!
A worn or damaged mowing blade
may break off and cause serious
injuries. The instructions for blade
maintenance must therefore always
be observed.
Blades are subjected to differing
degrees of wear depending on the
location and duration of use. If you
use the machine on sandy ground
or use it frequently under dry
conditions, the blade will be
subjected to greater loads and will
wear more quickly than the
average.
In order to prevent damage to the
blade fastening screw, use a
suitable 22 mm hexagon socket
(not included in standard
equipment).
Risk of injury!
The mowing blade (2) must only be
installed as shown. The tabs (6)
must face downwards (to the lawn)
and the curved wings must point
upwards (to the machine).
Observe the specified torque of
1
0
-
1
5 Nm
when tightening the
blade fastening screw, as the
secure attachment of the cutting
tool depends on this. Additionally
secure the blade fastening
screw (3) with
Loctite 243
.
The blade fastening screw (3) must
be replaced each time the blade is
replaced.
1
8
Summary of Contents for RME 443
