► If the battery is equipped with a Bluetooth
®
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
®
" LED next to the sym‐
bol
lights up blue for about 3 seconds. The
Bluetooth
®
radio interface on the battery is
activated.
► If the battery is equipped with a Bluetooth
®
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
®
" LED next to the sym‐
bol
flashes blue for six times. The Blue‐
tooth
®
radio interface on the battery is deacti‐
vated.
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
► Press sleeve (1) into the bores in upper han‐
dlebar (2).
► Fit spring washers (3) with the convex side
facing inwards onto sleeve (1).
► Guide upper handlebar (2) into handlebar
bracket (4).
► Push bolt (5) through the bores in handlebar
bracket (4) and the sleeve in upper handle‐
bar (2).
► Place nut (6) in the notch in handlebar
bracket (4).
► Tighten bolt (5).
► Press cable (7) into holders (8).
► Fasten cable (7) to the handlebar using cable
clip (9).
The handlebar must not be dismantled again.
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
English
7 Activating and Deactivating Bluetooth® Radio Interface
36
0478-131-9948-D
Summary of Contents for RMA 443.2 PV
Page 1: ......