Stihl RMA 2 RPV, Instruction Manual

Page: 40 / 444

Fault LEDs on the
battery
Cause Remedy
► Switch the lawn mower on in lower
grass.
The area around the
blade is blocked.
► Clean the lawn mower.
Self-propulsion is
not working.
There is a fault in the
self-propulsion
mechanism.
► Consult a STIHL specialist dealer.
The lawn mower
stops during ope‐
ration.
3 LEDs illumi‐
nate red.
The lawn mower is
too warm.
► Pull out the activation key.
► Remove the battery.
► Allow the lawn mower to cool down.
► Clean the lawn mower.
► Do not switch the lawn mower on too fre‐
quently within a short time.
► If working with self-propulsion engaged:
switch off self-propulsion.
► If working with self-propulsion disenga‐
ged: go forwards slower.
► Set a higher cutting height.
► Mow shorter grass.
The blade is blocked. ► Pull out the activation key.
► Remove the battery.
► Clean the lawn mower.
There is an electrical
fault.
► Remove the battery and fit it again.
► Switch the lawn mower on.
The lawn mower
vibrates excessi‐
vely during ope‐
ration.
The blade fastening
screw is loose.
► Tighten the screw.
The blade is not cor‐
rectly balanced.
► Sharpen and balance the blade.
The lawn mower
operating time is
too short.
The battery is not fully
charged.
► Fully charge the battery.
The battery service
life has been excee‐
ded.
► Replace the battery.
The area around the
blade is blocked.
► Clean the lawn mower.
The blade is blunt or
worn.
► Sharpen and balance the blade.
The resistance at the
blade is too great.
► If working with self-propulsion engaged:
switch off self-propulsion.
► If working with self-propulsion disenga‐
ged: go forwards slower.
► Set a higher cutting height.
► Mow shorter grass.
The battery gets
stuck when fitting
it into the battery
compartment.
The guides or electric
contacts in the battery
compartment are
dirty.
► Clean the lawn mower.
Charging fails to
start after fitting
the battery into
the charger.
1 LED illumina‐
tes red.
The battery is too
warm or too cold.
► Leave the battery inserted in the char‐
ger.
Charging starts automatically as soon as
the permissible temperature range is
reached.
English 19 Troubleshooting
40 0478-131-9950-B