RE 232, RE 272 PLUS, RE 282 PLUS
English
22
Always unplug the power cord before
servicing or cleaning the machine.
In order to ensure trouble free operation,
we recommend carrying out the
following steps whenever the machine is
used:
N
Rinse the water hose, high-
pressure hose, spray lance and
accessories with water before fitting
them
N
Remove all sand and dust from the
plug-type coupling of the spray
lance and the coupling sleeve of the
spray gun
Cleaning the high-pressure nozzle
Since the pump pressure increases if
the nozzle is clogged, it must be cleaned
immediately.
N
Switch off the machine
N
Actuate the spray gun until water
merely drips from the spray head –
the machine is now depressurized
N
Remove spray lance
N
Clean nozzle with a suitable needle
NOTICE
Always remove the spray lance before
cleaning the nozzle
N
Rinse spray lance with water from
the nozzle end
Cleaning the water filter
Clean the water filter when dirty.
N
Unscrew lid (1)
N
Lift the filter insert (2) up and off
N
Thoroughly rinse the lid (1) with
clear water
N
Thoroughly rinse the filter insert
from the inside to the outside with
clear water
N
Check filter insert – exchange if
filter insert is damaged
N
Cover outlet opening (3) with finger
N
Rinse filter housing thoroughly with
clear water.
N
Lubricate the O-ring (4) in the filter
housing and the O-ring in the lid with
multipurpose grease
N
Fit filter insert
N
Screw on and tighten lid
Cleaning the water intake screen
If the unit does not have a water filter,
clean the water intake screen once a
week or more often as necessary.
N
Disconnect hose connector (1).
N
Carefully release the strainer (2)
with pliers and rinse it.
N
Before refitting the strainer, ensure
that it is undamaged and replace if
necessary
Maintenance
647BA031 KN
6158BA026 KN
1
2
3
4
6158BA027 KN
1
6158BA022 KN
2
