► If using a water filter: Check the water filter for
dirt and clean it if it is dirty, 14.4.
► Set up the pressure washer on a firm and level
base, where it will not slide or tip over.
► Unroll high-pressure hose from hose reel,
► Connect spray gun, 6.3.
► Fit spray lance, 6.4.
► If using a nozzle: Attach the nozzle, 6.5.
► If using a detergent: Using detergents and the
► Connect water supply, 7.
► Connect pressure washer to power supply,
► If it is not possible to carry out these steps: Do
not use the pressure washer. Consult a STIHL
servicing dealer.
6
Assembling the pressure
washer
6.1
Assembling the high-pressure
washer
Installing handle with hose reel
3
1
2
0000098467_001
► Slide the handle (1) onto the holder (2).
► Insert screws (3) and tighten.
Connecting the hose reel
1
2
3
4
0000098487_001
► Fit the connecting piece (1) into the coupling
(2).
The connector (1) engages with an audible
click.
► Secure the cover (3) with the screw (4).
Inserting nozzles
1
0000085775_001
► Insert 3-in1 nozzle (1).
6.2
Installing the Batteries
4
3
2
1
0000098463_001
► Press the locking button (1).
► Remove control panel (2).
► Open the retaining latch (3).
► Remove the cover (4).
4
2
5
0000098499_001
► Insert the batteries (5) into the control panel
(2) according to the polarity- (+/-).
► Close cover (4).
► Insert the control panel into the spray gun.
The control panel engages with an audible
click.
English
6 Assembling the pressure washer
34
0458-004-9621-B
