Stihl RB 302, Instruction Manual

Page: 8 / 180

RB 302, RB 402 PLUS
English
6
Inspect the high-pressure
cleaner
Check that the high-pressure
cleaner is in full working order.
Pay particular attention to the
high-pressure hose, the spray
attachment, the safety parts
and the fuel system. Note the
relevant chapter of the
instruction manual:
WARNING
–
The high-pressure cleaner
should only be used if it is
in full working order – risk
of accident!
–
It must be possible to
move the switch to the 0
position easily
–
The switch must be in the 0
position
–
Check that the spark plug
boot is secure. A loose
boot can lead to flying
sparks which may ignite
the escaping fuel/air
mixture – risk of fire!
–
Inspect the high-pressure
hose, spray attachment
and safety mechanisms for
damage
–
High-pressure hose and
spray attachment in good
condition (clean, moving
easily) and correctly
assembled
–
For good control of the
machine, the handles
should be clean and dry
with no oil or dirt on them
–
Check the oil level
–
Never attempt to modify
the controls or safety
devices in any way
Starting the engine
Start the engine as described
in the engine manual.
Move at least 3 meters away
from the place at which the
machine was refueled and
never start the machine in
enclosed spaces.
Place the machine on a flat
surface and ensure a firm and
safe footing.
The machine is operated by
only one person. There should
not be any other person within
the working area, not even
when starting the machine.
Check that the speed drops:
the engine must idle when the
operator releases the trigger
on the spray gun.
During operation
WARNING
–
Never draw in fluids
containing solvents or
undiluted acids and
solvents (e. g., gasoline,
heating oil, paint thinner or
acetone). These
substances damage the
materials used in the
machine. The spray is
highly combustible,
explosive and poisonous.
Never direct the
high-pressure jet
or water hose
against electrical
appliances and
equipment – dan
-
ger of short-
circuiting!