manualshive.com logo in svg

Stihl MS 441 C, Instruction Manual, Page: 32 / 52

Share
Download
Stihl MS 441 C Instruction Manual Download Page 32

MS 441

English

30

Starting

N

With the right hand, pull the starter 

grip slowly until you feel it engage – 

and then give it a brisk strong pull – 

simultaneously press down on the 

handlebar – do not pull the starter 

rope out all the way – risk of 

breakage! Do not let the starter grip 

snap back – guide it vertically back 

into the housing so that the starter 

rope can rewind properly 

With a new engine or after a long period 

of disuse, with machines without an 

additional manual fuel pump, it may be 

necessary to pull the starter rope several 

times – to prime the fuel line.

Starting the chain saw

WARNING

There must not be anyone within the 

swivel range of the chain saw.

N

Press the button, the 

decompression valve will be 

opened

The decompression valve is closed 

automatically when the engine fires for 

the first time. For this reason, press the 

button again before each additional 

starting attempt.

N

Push the hand guard (1) forwards – 

the saw chain is blocked

N

Simultaneously press the throttle 

trigger lockout (2) and throttle 

trigger (3) – set master control 

lever (4)

Position cold start

l

–

If engine is cold (even if the engine 

has stalled during opening of 

throttle after starting)

Position warm start

n

–

If engine is warm (once the engine 

has been running for approx. one 

minute)

N

Hold and start the chain saw

STOP

0

Summary of Contents for MS 441 C





















































Reviews:

No comments