MS 362 C-Q
English
15
Chain Scabbard
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
If guide bars of different lengths are
mounted to the saw, always use a chain
scabbard of the correct length which
covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
Guide bars longer than 90 cm require
one scabbard extension. Guide bars
longer than 120 cm require two
scabbard extensions.
Depending on the model, the scabbard
extension either comes standard with
the saw or is available as a special
accessory.
Fitting Chain Scabbard Extension
N
Push the scabbard extension and
chain scabbard together – the
lugs (1) must engage in the chain
scabbard.
Removing the chain sprocket cover
N
Unscrew the nuts and take off the
chain sprocket cover.
N
Turn the screw (1)
counterclockwise until the tensioner
slide (2) butts against the left end of
the housing slot.
001BA244 KN
001BA245 KN
1
1
Mounting the Bar and Chain
143BA034 KN
1
2
001BA185 KN
