Stihl MS 241 C-M, Instruction Manual, Page: 24 / 112

MS 241 C-M
English
22
Closing
Grip must be vertical:
N
Fit the cap – marks on tank cap and
fuel tank must line up.
N
Press the cap down as far as stop.
N
While holding the cap depressed,
turn it clockwise until it engages in
position.
The marks on the tank cap and fuel tank
are then in alignment.
N
Fold the grip down so that it is flush
with the top of the cap.
Tank cap is locked.
If the tank cap cannot be locked in the
fuel tank opening
Bottom of cap is twisted in relation to
top.
N
Remove the cap from the fuel tank
and check it from above.
N
Place the cap on the opening and
rotate it counterclockwise until it
engages the filler neck.
N
Continue rotating the cap
counterclockwise (about a quarter
turn) – this causes the bottom of the
cap to be turned to the correct
position.
N
Turn the cap clockwise and lock it in
position – see section on "Closing".
001BA234 KN
001BA233 KN
001BA231 KN
001BA235 KN
001BA241 KN
Left: Bottom of cap is twisted –
inner mark (1) in line with
outer mark.
Right: Bottom of cap in correct posi
-
tion – inner mark is under the
grip. It is not in line with the
outer mark.
1
001BA238 KN
001BA239 KN