► Move the Master Control lever (2) to posi‐
tion .
0000-GXX-7581-A0
► Stand the saw on a level surface.
► Hold the trimmer firmly with your right hand on
the top handle – wrap your thumb around the
handle.
► Press the saw against the ground with your
right hand.
► Hold the saw steady with your right knee on
the shroud.
► Pull the starter grip slowly with your left hand
until you feel it engage.
► Pull the starter grip quickly and allow the
starter rope to rewind several times until the
engine runs.
► Press down the throttle trigger lockout (3) and
hold it there.
► Blip the throttle trigger (4).
The Master Control lever (2) springs to posi‐
tion . The engine runs at idling speed.
NOTICE
■ Do not accelerate the engine with the chain
brake engaged since this can damage the
chain brake.
► Disengage the chain brake before you start
cutting.
► Disengage the chain brake.
Your saw is ready for operation.
► If the saw chain rotates while the engine is
idling: See troubleshooting.
Idle speed adjustment is not correct.
► If the engine does not start: Prepare the
engine for the start and then try again to start
the engine.
9.4
Stopping the engine
2
3
1
0000-GXX-7583-A0
► Release the throttle trigger (3) and lockout
lever (2).
The saw chain stops running.
► Move the Master Control lever (1) to posi‐
tion .
The engine stops and the Master Control lever
(1) springs back to position .
10 Checking the Saw
10.1
Checking the Chain Sprocket
► Shut off the engine.
► Disengage the chain brake.
► Remove the chain sprocket cover.
► Remove the bar and chain.
0000-GXX-7568-A0
► If there are visible wear marks: Do not use the
chainsaw and contact your STIHL servicing
dealer for assistance.
The chain sprocket must be replaced.
10.2
Checking the Guide Bar
► Shut off the engine and engage the chain
brake.
► Remove the chain and guide bar.
0000-GXX-1217-A0
10 Checking the Saw
English
0458-568-8321-B
15
