34
English / USA
MS 191 T
:
Remove the filter element
(3)
.
:
Wash the filter in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
:
Always replace a damaged filter
element.
:
Reinstall the air filter.
When fitting the filter cover, make
sure it is properly positioned on the
guide lugs.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
General Information
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum fuel-air
mixture under most operating
conditions.
With this carburetor it is only possible to
adjust the engine idle speed within fine
limits.
3
170BA033 KN
Motor Management
Adjusting the Carburetor
Summary of Contents for MS 191 T
Page 53: ...52 English USA MS 191 T...
Page 105: ...104 espa ol EE UU MS 191 T...