![background image](http://html1.mh-extra.com/html/stihl/mh-710/mh-710_instruction-manual_1379643023.webp)
Fault
Cause
Remedy
Engine running
roughly.
Oil bath air filter dirty. ► Clean or replace oil bath air filter.
Incorrect fuel used.
► Check fuel.
Insufficient fuel in fuel
tank.
► Refill fuel tank.
Heavy smoke forma‐
tion.
Oil level in engine too
high.
► Drain engine oil.
Oil bath air filter dirty. ► Clean or replace oil bath air filter.
Angle of machine
inclination over 15°.
► Place machine in horizontal working position.
Excessive vibration
during operation.
Engine mounting
loose.
► Tighten engine mounting bolts.
Tilling performance
reduced.
Hoes incorrectly
installed.
► Install hoes correctly.
Hoes worn.
► Replace hoes.
Blade spur incorrectly
set.
► Adjust blade spur.
Blade spur incorrectly
set.
► Adjust blade spur.
Drive belt worn.
► Consult a STIHL specialist dealer.
Loud gearbox noise.
Incorrect oil level in
gearbox.
► Check oil level in gearbox.
Components in gear‐
box worn.
► Consult a STIHL specialist dealer.
Drive shaft does not
rotate when clutch
lever actuated.
Cable defective.
► Check or replace cable.
Drive belt worn.
► Consult a STIHL specialist dealer.
Oil leaking from gear‐
box or engine.
Components in gear‐
box or engine worn.
► Consult a STIHL specialist dealer.
19 Specifications
19.1
STIHL MH 710 Tiller
–
Displacement: 252 cm³
–
Power: 5.2 kW (7.1 HP) at 3,600 rpm
–
Drive shaft speed in first gear: 65 rpm
–
Drive shaft speed in second gear: 128 rpm
–
Drive shaft speed in reverse gear: 49 rpm
–
Weight: 101 kg
–
Maximum fuel tank capacity: 4,000 cm³ (4.0 l)
–
Hoe diameter: 360 mm
–
Working width: 970 mm
19.2
Sound Values and Vibration
Values
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2 dB(A). The K value for the vibration values is
3.20 m/s².
–
Sound pressure level L
pA
measured in accord‐
ance with 2006/42/EC: 86 dB(A)
–
Sound power level L
wA
measured in accord‐
ance with 2000/14/EC: 100 dB(A)
–
Vibration value ahv measured in accordance
with EN 12096, handlebar: 8 m/s²
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
19.3
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Spare Parts and Accesso‐
ries
20.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
19 Specifications
English
0478-404-9905-B
23