HT-KM
English
13
NOTICE
A full chain oil tank is sufficient for only
half a tankful of fuel. Check the oil level
regularly during cutting work. Never
allow the oil tank to run dry
Preparations
N
Thoroughly clean the fuel cap and
the area around it to ensure that no
dirt falls into the tank
N
Position the machine so that the fuel
cap is facing upwards
To open:
N
Open the bracket
N
Twist fuel cap (ca. 1/4 turn)
Markings on fuel cap and oil tank must
align
N
Remove the fuel cap
Filling up with chain oil
N
Fill up with chain oil
Take care not to spill chain oil during
refilling and do not overfill the tank.
STIHL recommends use of the STIHL
filling system for chain oil (special
accessory).
To close:
Clip is in an upright position:
N
Fit the fuel cap – marks on the fuel
cap and oil tank must line up.
N
Push the fuel cap down as far as it
will go
Filling Chain Oil Tank
0000097195
001
0000,GXX-0135-A0 KN
0000-GXX-0136-A0
0000-GXX-0137-A0 KN
0000-GXX-0138-A0 KN
0000-GXX-0137-A0 KN
Summary of Contents for KombiTool HT-KM 4182
Page 1: ...STIHL HT KM Instruction Manual...
Page 2: ......
Page 31: ......
Page 32: ...www stihl com 04584730121C 0458 473 0121 C 0458 473 0121 C englisch G...