10
English
KB-MM, KW-MM
Set of Wheels (Special
Accessory)
Using the set of wheels simplifies
work with the sweeping tool. See
also notes on "Wheels" in the
MultiEngine instruction manual.
Cleaning the Sweeping Tool
Clean away any dirt and debris that has
accumulated between the sweeping
tools, in the area of the gearbox or
between the sweeping tools and the
deflector:
–
Shut off the engine.
–
Pull the hitch pin out of the axle.
–
Remove the sweeping tool from the
axle.
–
Clean the sweeping tools, gearbox
and deflector.
Refit the sweeping tools – see
"Mounting the MultiTool".
Only MultiEngines which have been
supplied by STIHL or specially approved
for use with this MultiTool may be used.
This MultiTool may only be used in
combination with STIHL MM 55.
486BA006 KN
Approved MultiEngines