KB-KM, KW-KM
English
9
N
Loosen the clamp screws (5).
N
Push the gearbox (6) onto the drive
tube (3), turn the gearbox back and
forth as necessary.
Aligning the Gearbox
N
Line up the gearbox on the drive
tube so that the distance between
the horizontal axles (7) and the
deflector is the same at both sides.
N
Tighten down the clamp screws
firmly.
WARNING
It must not be possible to rotate the
gearbox on the drive tube.
N
Mount the two sweeping
attachments – see "Replacing the
Sweeping Attachmenrs".
N
Push the lug (1) on the drive tube
into the slot (2) in the coupling
sleeve as far as stop.
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
N
Tighten down the star knob (4)
firmly.
Removing the KombiTool
N
Reverse the above sequence to
remove the drive tube.
3
479BA019 KN
5
5
6
Mounting the KombiTool
1
002BA326 KN
2
3
002BA327 KN
4