Stihl HS 87, Instruction Manual

Page: 7 / 24

3 Using the Unit
3.1 HS 87 R
The HS 87 R is designed for cutting hedges and
shrubs with thicker stems and branches.
3.2 HS 87 T
The HS 87 T is designed for shaping and trim‐
ming hedges and shrubs with thinner branches.
Use the HS 87 R hedge trimmer for cutting hed‐
ges with thicker branches.
3.3 Cutting Season
Observe country-specific or municipal rules and
regulations for cutting hedges.
Do not use your power tool during other people's
normal rest periods.
3.4 Cutting Sequence
Use lopping shears or a chain saw to cut out
thick branches first.
Cut both sides of the hedge first, then the top.
3.5 Disposal
Do not throw cuttings in the garbage can – they
can be composted!
3.6 Working Technique
3.6.1 Vertical Cut
Swing the cutting blade from the bottom upwards
in an arc – lower the nose of the blade, move
along the hedge and then swing the blade up
again in an arc.
Any working position above head height is tiring.
To minimize the risk of accidents, work in such
positions for short periods only.
3 Using the Unit English
0458-449-0121-C 7