Stihl HS 82, Instruction Manual

Page: 18 / 76

HS 82 R, HS 82 T
English
16
The rear handle can be turned through
90° to the left or right for better control
and comfort in all cutting situations.
N
Let go of the throttle trigger. Do not
open the throttle.
N
Release the lock (1).
N
Turn the handle (2) to the required
position and re-engage the lock (1).
The throttle trigger may be used again
when the handle is locked in position.
Do not operate the throttle while the
handle lock is released. Never release
the lock while you are operating the
throttle.
N
Observe safety precautions – see
chapter on "Safety Precautions and
Working Techniques".
The stop switch (1) is in the normal run
position I.
N
Depress the trigger lockout (2) and
pull the throttle trigger (3) – hold
them in that position.
N
Press in the starting throttle lock (4).
N
Let go of the lockout lever, throttle
trigger and starting throttle lock.
This is the starting throttle position.
N
Set the choke lever (5) to
N
Press the manual fuel pump bulb at
least five times – even if the bulb is
filled with fuel.
Cranking
N
Place the unit on the ground.
N
Remove the blade scabbard. Check
that the cutting blades are not
touching the ground or any other
obstacles.
N
Make sure you have a safe and
secure footing.
N
Hold the unit firmly with your left
hand on the fan housing and press
down.
N
Hold the starter grip with your right
hand.
Rear Handle
1
0023BA006 KN
2
Starting / Stopping the
Engine
g
if the engine is cold
e
for warm start – also use this posi
-
tion if the engine has been running
but is still cold.
3
2
4
0023BA007 KN
1
5
0023BA008 KN
443BA039 KN