![background image](http://html1.mh-extra.com/html/stihl/hl-94/hl-94_instruction-manual_1379290024.webp)
HL 94
English
22
Running engine stalls in cold start
position
g
or under acceleration.
N
Continue cranking in position
F
until
the engine runs.
If the engine does not start
N
Check that all settings are correct.
N
Check that there is fuel in the tank
and refuel if necessary.
N
Check that the spark plug boot is
properly connected.
N
Repeat the starting procedure.
Engine is flooded
N
Move the choke knob to
F
and
continue cranking until the engine
runs.
Fuel tank run until completely dry
N
After refueling, press the manual
fuel pump bulb at least five times –
even if the bulb is already filled with
fuel.
N
Set the choke knob according to
engine temperature.
N
Now start the engine.
During break-in period
A factory-new machine should not be
run at high revs (full throttle off load) for
the first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This protects engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Empty the fuel tank
and keep the machine in a dry place,
well away from sources of ignition, until
you need it again. For longer out-of-
service periods – see "Storing the
Machine".
If there is a noticeable loss of engine
power
N
Set knob for warm start (1) to
g
N
Turn screw (2) in filter cover (3)
counterclockwise until the cover is
loose
N
Remove filter cover (3)
N
Clean away loose dirt from around
the filter
N
Grip into the recess (4) in the filter
housing and remove the felt filter (5)
N
Replace felt filter (5) – as a
temporary measure you can knock it
out on the palm of you hand or blow
it out with compressed air – do not
wash
Operating Instructions
Cleaning the Air Filter
0208BA034 KN
1
0208BA035 KN
5
4
Summary of Contents for HL 94
Page 2: ...Instruction Manual 1 39 Manual de instrucciones 40 82 ...
Page 85: ...HL 94 español EE UU 83 ...
Page 86: ...HL 94 español EE UU 84 ...
Page 87: ......