3.5.3
Vertical Cut (with straight cutter bar)
389BA050 KN
Extra long reach without the need for other aids.
Swing the cutter bar up and down in an arc as
you move along the hedge – use both sides of
the cutting blades.
3.5.4
Overhead Cut (with cutter bar at an
angle)
388BA031 KN
Hold the hedge trimmer vertically and swing it in
an arc to make maximum use of its reach.
WARNING
Any working position above head height is tiring.
To minimize the risk of accidents, work in such
positions for short periods only. Set the adjusta‐
ble cutter bar to the most suitable angle so that
the unit can be held in a lower, less tiring position
while still providing adequate reach.
3.5.5
Horizontal Cut (with straight cutter bar)
388BA032 KN
Hold the cutter bar at an angle of 0° to 10° as
you swing the hedge trimmer horizontally.
3 Using the Unit
English
0458-519-8321-D
9
