Stihl HL 90, Instruction Manual

Page: 17 / 72

HL 90 K
English
15
Opening the filler cap
N
Turn the cap counterclockwise until
it can be removed from the tank
opening.
N
Remove the filler cap.
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the filler cap
N
Position cap.
N
Turn the cap clockwise as far as it
will go and tighten it as securely as
possible by hand.
Controls
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
4
STOP
-
0 – engine off – the ignition is
switched off
5
F
– normal run position – the engine
is running or can start
6 START – the ignition is switched on
– the engine can start
Symbol on slide control
7
h
– stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (
h
) to STOP
-
0.
Starting the Engine
N
Press down the trigger lockout lever
and squeeze the throttle trigger
N
and hold them in that position.
N
Move the slide control to START
and hold it there.
N
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the starting
throttle position.
N
Set the choke knob (8)
2709BA003 KN
2709BA004 KN
Starting / Stopping the
Engine
3
STOP
2
5
6
4
7
002BA181 KN
START
STOP-
1
249BA057 KN
9
8