Stihl FUNCTION, Instruction Manual

Page: 196 / 288

8
G
modified.
– Before each use, check the condition of the product (e.g. optical
condition of product). Discard the product immediately if it is damaged
or has been modified.
– The hearing protector’s noise attenuating properties can dramatically
decrease with usage of for example thick spectacle frames, ski masks/
balaclavas, etc.
– Use of perspiration/hygienic protection over the sealing rings can
reduce the hearing protector’s noise attenuation properties.
– Earmuffs, and in particular cushions, may deteriorate with use and
should be examined at frequent intervals for cracking and leakage.
– Immediately discard the product if showing signs of cracks or damage.
– Improper cleaning and care may have a negative influence on the
product’s protective function. Please follow the cleaning and care
instructions.
– Clean the product with mild soap. You must be sure that the detergent
you use does not irritate the skin. Do not dip the product in water.
– The hearing protector must be stored in a dry and clean environment,
out of direct sun light, e.g. in its original packaging.
Fitting & adjustment
: Brush away all hair from the ears and place the hearing protectors
over the ears so that they fit comfortably and snugly. Ensure that the
ears are completely enclosed by the hearing protectors and that you
have even pressure around the ears.
: Headband (Illustration A): Adjust the headband size so that it rests
lightly against the crown of your head.
: Helmet/Cap mount (Illustration B): These earmuffs should be fitted
to, and used only with the following industrial safety helmets:
STIHL FUNCTION Basic. Push the hearing protectors helmet
attachment into the helmet slot until it locks into position. Place the
hearing protectors over the ears and press inwards until you hear a
click. Adjust the hearing protectors and helmet so that they fit
comfortably and snugly on your head.
Hygiene set
– for S2H: 0000 884 0518
– for Z1C: 0000 884 0564
Pads should be replaced regularly (at least every six months), depending
on the duration of use.
: Choose the appropriate hygiene set for your ear protection.
: Always use original STIHL parts.
Replacing the hygiene set