Stihl FS 25-4, User Manual

Page: 27 / 45

- Remove the throttle trigger
- see 9.1.
•
Lift contact spring (1) a little and
remove the throttle cable (2).
•
Remove spring from seats (1)
and peg (2).
•
Remove contact spring from
peg (1) and collar screw (2).
•
Take out slide control’s collar
screw (1).
•
Remove detent spring (2).
•
Pull slide control out of handle
molding.
Assemble in the reverse
sequence.
- Engage contact spring correctly
in groove of collar screw.
•
Use screwdriver (1)
5910 890 2301 to remove screw.
•
Push guard (2) forward.
Warning: To avoid risk of electric
shock, do not start the unit while
the control handle is open.
•
Remove screws with screwdriver
(1) 5910 890 2301.
- Remove handle molding.
•
Remove torsion spring.
9.2 Contact Springs/Detent Spring in Control Handle 9.3 Throttle Trigger/Interlock
(Bike Handle) Lever (Loop Handle)
FS 25-4, 65-4 27