22
English / USA
FS 100 RX
Symbol on slide control
h
(
7
) – stop symbol and arrow – to stop
the engine, push the slide control in
direction of arrow on stop symbol (
h
) to
STOP
-
O
.
Starting
:
Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
:
While holding both levers in this
position
:
move the slide control to
START
and hold it there.
:
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the
starting
throttle position
.
:
Set the choke knob (
8
):
For cold start to
g
For warm start to
e
even if engine has been running but
is still cold
:
Press fuel pump bulb (
9
) at least five
times – even if the bulb is already
filled with fuel.
:
Place the unit on the ground: It must
rest securely on the engine support
and deflector.
Check that the cutting tool is not
touching the ground or any other
obstacles.
:
Make sure you have a firm footing.
:
Hold the unit with your left hand and
press it down
firmly
– your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube!
249BA007 KN
9
8
Summary of Contents for FS 100 RX
Page 45: ...44 English USA FS 100 RX ...
Page 89: ...88 español EE UU FS 100 RX ...
