background image

Despite ongoing market observation, STIHL is

unable to judge the reliability, safety and suitabil‐

ity of other manufacturers' spare parts and

accessories; accordingly, STIHL cannot warrant

for the use of those parts.
Original STIHL spare parts and original STIHL

accessories are available from STIHL dealers.

23 Disposal

23.1

Disposing of the Brushcutter

Contact the local authorities or your STIHL

dealer for information on disposal.
Improper disposal can be harmful to health and

pollute the environment.

► Take STIHL products including packaging to a

suitable collection point for recycling in accord‐

ance with local regulations.

► Do not dispose with domestic waste.

24 EC Declaration of Con‐

formity

24.1

STIHL FR 460 TC-FM brush‐

cutter

ANDREAS STIHL AG & Co. KG

Badstraße 115

D-71336 Waiblingen
Germany
declare under our sole responsibility that

Category: Brushcutter

Manufacturer's brand: STIHL

Type: FR 460 TC-FM

Serial number: 4147

conforms to the relevant provisions of Directives

2011/65/EU, 2006/42/EC, 2014/30/EU and

2000/14/EC and has been developed and manu‐

factured in compliance with the following stand‐

ards in the versions valid on the date of produc‐

tion: EN ISO 11806-2, EN 55012 and

EN 61000‑6‑1.
The measured and guaranteed sound power lev‐

els were determined according to Directive

2000/14/EC, Annex V.

Measured sound power level: 112 dB(A)

Guaranteed sound power level: 114 dB(A)

The technical documents are stored at

ANDREAS STIHL AG & Co. KG Produktzulas‐

sung.

The year of manufacture, country of manufacture

and serial number are specified on the rating

plate of the brushcutter.
Waiblingen, 08.10.2021
ANDREAS STIHL AG & Co. KG

pp
Dr. Jürgen Hoffmann, Director Product Certifica‐

tion & Regulatory Affairs

25 UKCA Declaration of Con‐

formity

25.1

STIHL FR 460 TC-FM brush‐

cutter

ANDREAS STIHL AG & Co. KG

Badstraße 115

D-71336 Waiblingen
Germany
declare under our sole responsibility that

Category: Brushcutter

Manufacturer's brand: STIHL

Type: FR 460 TC-FM

Serial number: 4147

conforms to the relevant provisions of UK regula‐

tions The Restriction of the Use of Certain Haz‐

ardous Substances in Electrical and Electronic

Equipment Regulations 2012, Supply of Machi‐

nery (Safety) Regulations 2008, Electromagnetic

Compatibility Regulations 2016 and Noise Emis‐

sion in the Environment by Equipment for use

Outdoors Regulations 2001 and has been manu‐

factured in compliance with the following stand‐

ards in the versions valid on the date of produc‐

tion: EN ISO 11806‑2, EN 55012, and

EN 61000‑6‑1.
The measured and the guaranteed sound power

level have been determined in accordance with

UK regulation Noise Emission in the Environ‐

ment by Equipment for use Outdoors Regula‐

tions 2001 Annex 8.

Measured sound power level: 112 dB(A)

Guaranteed sound power level: 114 dB(A)

English

23 Disposal

24

0458-563-0101-A

Summary of Contents for FR 460 TC-FM





























Reviews: